BJM R400D-115 2" Submersible Pump - 201366
BJM R400D-115 2" Mop-Up Submersible PumpMopping up after flooding is made easy with the model R400D. The Mop-up features a unique non-return valve built in below the impeller. The rubber clad bottom helps protect against damage to floor surfaces. Pumping down to 1/12 of an inch and starts up in only a small puddle of liquid, and features a special diaphragm valve that prevents water back flow. Perfect for easy clean up of floods, and spills in basements, businesses, industrial and recreation areas.
Features
- Ideal for dewatering construction sites, mines, circulating fountain water, or for all around use in industrial plants and utilities
- Quality engineered for long life, and is built with a silicon carbide seal, class F motor insulation, ABS plastic and SS metal parts and Hi temp dry run motor protection
- Fits easily into an 8" casing
- With the light weight and slim design of the R-400D-115 pumps, you get top performance and superior quality for a very modest investment
- R400D special feature is it will pump down to 1/12th of an inch
- Features a special diaphragm valve that prevents water back-flow
- 304SS motor housing; superior to pumps with aluminum housings that wear out pumping sandy water
- R400D impeller made of fiberglass reinforced Noryl. Lower seal carbon/ceramic
- 1/2 HP, 115V, single phase, 6 Full Load Amp
Specifications
| MAX. FLOW |
50 gpm |
| MAX. HEAD |
36 ft |
| MAX SUBMERSION DEPTH |
65 ft or the length of the cord. |
| STRAINER OPENING |
N/A |
| DISCHARGE CONNECTION |
2" NPT-M |
| PUMP WEIGHT |
33 lbs |
| MOTOR CASING |
304 SS |
| PUMP VOLUTE |
Cast Iron |
| IMPELLER-MULTI VANE |
FG Reinforced Plastic |
| LIPSEAL & O-RINGS |
Buna-N |
| ROTOR SHAFT |
304 SS |
| EXTERNAL HARDWARE |
304 SS |
| QTY. OIL IN SEAL CHAMBER |
1.35 U.S. fl. oz. |
What Our Experts Think
-
Reliable Dewatering Solution – Effectively handles water removal in tough environments.
-
Durable Construction – Corrosion-resistant materials ensure long-lasting performance.
-
115V Efficient Motor – Delivers consistent pumping power for various applications.
-
Fully Submersible Design – Optimized for continuous operation without overheating.
-
Versatile Use – Ideal for construction sites, basements, wastewater management, and industrial settings.
Q&A
Q: What is the BJM R400D-115 2" Submersible Pump?
A: The BJM R400D-115 is a rugged 2-inch submersible pump designed for efficient dewatering and handling of abrasive or corrosive liquids in industrial and commercial settings.
Q: What makes this pump unique?
A: It features a durable construction, a reliable 0.5 HP motor, and the ability to operate efficiently in demanding environments, ensuring long-lasting performance.
Q: What are the typical applications?
A: Ideal for wastewater management, sump drainage, slurry handling, and other industrial dewatering needs.
Q: Why choose the BJM R400D-115?
A: It offers reliable operation, corrosion resistance, and efficient water removal at 115V, making it a dependable solution for tough job site conditions.
Maintenance Tips
-
Daily: Inspect for debris or blockages in the intake. Ensure the power cord and plug are undamaged.
-
Weekly: Check for unusual noise, vibration, or reduced water flow. Clean the intake screen to prevent clogging.
-
Monthly: Examine seals, gaskets, and O-rings for wear. Ensure the motor operates efficiently without overheating.
-
Quarterly: Perform a deep cleaning, inspect for corrosion, and replace any worn components. Lubricate moving parts if necessary.
